Lithium Iron Phosphate Battery

LP16-24100 LiFePO4 Battery (25.6V/100Ah)


MUST LP1600 wall mounted Lithium battery is with a ground-breaking LiFePO4 battery packsolutions are highly integrated, deep cycle backuppower solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of thefashionable design, high energy, high power density, long service life, and easiness of installation.

Key Benefits

  • Wall Mounted LiFePO4 Battery
  • Easy installation and maintenance
  • High-quality lithium battery
  • Compact size, lightweight
  • Intelligent Battery Management System
  • High Quality Battery Cell Provides Long Operating Life
  • Overview



    Lithium Iron Phosphate(LiFePO4 Battery) can be used in most applications that use Lead Acid, GEL or AGM type batteries.

    Suitable applications include:

    •Solar Storage
    •Switching applications and more
    •Base transceiver station
    •Communication equipments
    •Central office
    •Telecommunication systems
    •Electronic cash registers
    •Microprocessor based office machine


    High cycle life

    6000 Cycles (25℃, 80% DOD) for effectively lower total of ownership cost

    Longer service life

    Low maintenance batteries with stable chemistry.

    Built in circuit protection

    Battery Management System (BMS) is incorporated against abuse.

    Better storage

    up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.

    Quickly recharge

    Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.

    Extreme heat tolerance

    Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.


    Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.


    •Do NOT short circuit, reverse polarity, crush or disassemble.
    •Do NOT heat or incinerate.
    •Do NOT immerse in any liquid.
    •Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.

    ↓↓↓Installation Portfolio------------

    Nominal Voltage25.6V
    Nominal Capacity100Ah
    Nominal energy2560Wh
    Life Cycles6000 Cycles (25℃, 80% DOD)
    Recommended Charge Voltage29.2V
    Recommended Charge Current20A
    End Of Discharge Voltage22V
    Standard MethodCharge20A
    Maximum Continuous CurrentCharge100A
    BMS Cut-Off VoltageCharge29.2 V (3.65V/Cell)
    Discharge22.0V (2s) (2.75V/Cell)
    TemperatureCharge-4 ~ 113 ℉ (0 ~ 45℃ )
    Discharge-4 ~ 131 ℉ (-20 ~ 55 ℃ )
    Storage Temperature23~95 ℉ (-5~35℃ )
    Shipment voltage≥25.6V
    Module ParallelUp to 15 units
    Case MaterialSPPC
    Dimension (L x W x H)450 x 400 x 140
    27.5 x 19.3 x 8.3””
    Approx. Weight50.71lbs (23kg)
    Charge Retention And Capacity Recovery CapabilityStandard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90